Do you know these maintenance precautions for glass Automatic door?
Time: 2023-06-12 View: 465
1. Use a clean and dry cloth to clean the dust, impurities, and oil sludge inside the chassis.
2. Since the lifting pulley and drive belt of the glass Automatic door have been worn for years, the lifting pulley and drive belt can be oiled to reduce wear and noise.
3. Check the comprehensive voltage data and check if the voltage variation value is within the normal range.
4. Check the wear of transmission components, position deviation, and screw tightness, check the belt tension, and tighten the belt appropriately as needed.
5. Check whether the installation position and function of the startup sensor and safety sensor are normal. If there is any looseness, tighten and fix it with a screwdriver.
6. Check whether the controller controls the motor output, torque, opening and closing width, speed, braking and other control data. Debug according to the instructions of different products.
7. Check if the impact force meets the standard indicator requirements. If it is too large or too small, follow the specific steps in the manual for debugging.
8. Check if the braking distance meets the standard requirements. During adjustment, observe the movement speed of glass Automatic door and sensing door body.
9. Check and repair other faults of the gantry crane equipment. If professional installation personnel are unable to come to the site for maintenance, please follow the guidance of professional maintenance personnel for maintenance.
10. The repaired glass Automatic door shall be restored to the requirements of all normal functional indicators.
